ADB over Wi-Fi



 To debug the behavior of your application while an accessory is plugged in, you can't use ADB through a USB cable.

In this case, to debug applications, you need to link your device to ADB over Wi-Fi.


Steps to configure the ADB connection over Wi-Fi

  • Connect the device and the computer to the same Wi-Fi network. If the computer is connected to VPN, disconnect from it. The device can be on VPN.

  • Plug the device into the computer with a USB cable to configure the connection

  • On the computer command line type: adb tcpip 5555

  • On the computer command line type: adb shell ip addr show wlan0 and copy the IP address after the "inet" until the "/". You can also go inside the Settings of the device to retrieve the IP address in Settings → About → Status.

  • On the computer command line type: adb connect ip-address-of-device:5555

  • You can disconnect the USB cable from the device and check with adb devices that the device is still detected.


adb wifi in terminal
adb over wifi


Comments

Post a Comment

Popular posts from this blog

Install Git on Windows

Image
Go to the URL:  https://git-scm.com/downloads Click on the " Download 2.16.1 for Windows " or whichever is the latest version that's written there. Run the downloaded installer file. When you arrive in this window, chose either the first or second option. If you chose the first option, you will have to run the Git commands from a different terminal not from the command prompt (cmd.exe) later on. Everything else is default. Complete the installation. Now go to https://www.github.com and sign up. Now you will be able to create and clone git projects. Watch the following video tutorial for these above steps.
Read more